Advantages Of Coolers And Key Points Of Operation Of Tubular Coolers

The cooler can remove the heat generated by the instrument through the relatively cold water, thus keeping the temperature of the instrument part at a low level. Compared with tap water cooling, the cooler cooling method has incomparable advantages over the tap water cooling method. Next, the editor will introduce the advantages of the cooler.

What are the advantages of the cooler? The circulating water cooling method can save a lot of valuable water resources; the circulating water cooling method uses deionized water or distilled water, which will not produce scale in the waterway of the equipment, which can prolong the service life of the laser equipment and improve the The stability of its measurement; the circulating water cooling method (refrigeration type) can arbitrarily adjust the temperature of the cooling water.

What are the classifications of coolers? Coolers are classified according to their functions. There are two types of non-refrigerated and refrigerated types. composition. Its function can only be used to cool down, generally it cannot control the temperature, and the water temperature depends on the ambient temperature of the place where it is placed. Because the fan blows water onto the radiator to achieve cooling, the water temperature in the instrument's water circuit cannot be lower than the ambient temperature. Therefore, non-refrigerated cooling coolers are generally suitable for instruments or equipment with low requirements for water temperature control and low heat production.

There are many types of coolers on the market now, among which the tubular cooler is the most widely used. So what are the operation and maintenance instructions that need to be paid attention to during the use of the tubular cooler? Please follow the editor below. Come find out.

First of all, we need to pay attention to cleaning the dirt in the water pipe even when using it, because the long-term use of the tubular cooler may produce a lot of dirt. If it is not cleaned for a long time, it may seriously affect the cooling effect. .

Secondly, when using a tubular cooler, you need to pay attention to the power supply and voltage of the tubular cooler in advance. Only the power supply and power supply within the normal range can make the tubular cooler operate normally. If the voltage or The power supply is unstable, and it may easily burn out the motor of the tube cooler.

Finally, the editor pointed out that in the process of normal use, we often overlook some problems, that is, whether some motor fans or the screws on the body are loose, which needs to be simple and regular, and once found, it should be replaced or tightened in time.